Product Description
Steering Knuckle - Front Left Here's a step-by-step guide to replace a fleet van steering knuckle: Lift the van with a hydraulic jack and securely support it on jack stands for necessary clearance. Remove the wheel and tire assembly by loosening the lug nuts with a lug wrench and sliding the wheel off the hub. Locate the steering knuckle, connected to the suspension and wheel hub assembly. Remove components like brake calipers, tie rod ends, and ball joints to access the steering knuckle. Using a socket wrench and hammer, carefully loosen and remove the bolts securing the steering knuckle to the suspension components. Detach the old steering knuckle, clean the area, and prepare the new steering knuckle for installation. Align the new steering knuckle with the suspension components and wheel hub assembly, ensuring bolt holes line up correctly. Tighten the bolts securely, following the manufacturer's recommended torque specifications to ensure stability and safety. Reinstall removed components like brake calipers, tie rod ends, and ball joints. Reattach the wheel and tire assembly to the hub, tightening the lug nuts in a star pattern for even tightening. Lower the van from the jack stands and double-check that all components are securely fastened and aligned.Cross References
Product Videos
Fitment
Product Reviews
Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov.
